Aurolex Sound monitoring

Noise Monitoring

The new Aurolex sound monitoring system is very compact with dimensions 120 x 120 mm. On board is a class 1 sound analyzer and a 7-channel data logger. The system is plug-and-play, you do not have to understand the sound to see the data. All sound measurement values ​​can be consulted via the internet. Reports are automatically forwarded to you as a pdf file. You will receive warnings on your telephone or e-mail (or several people) if certain set standards are exceeded. Very user-friendly and very affordable (the most cost-effective class 1 monitoring system in the world!). It is used, among other things, as a noise monitoring system for port projects, events and also the TT circuit (see www.aurolex-drenthe.com). An innovative system based on a class 1 IEC 61672 sound analysis. Optionally, a weather station can be connected that measures all meteo parameters. The system also has a connection for 220V, a charging unit and for a heavy maintenance-free battery (optional). The system automatically sends its data via a GPRS connection to our servers, where you can consult the data. It is also possible to receive a daily report in which the most used information is brought together. The system is equipped with a weather-resistant microphone. The Aurolex Monitoring System has the ability to monitor an extensive range of environmental issues. Sensors for vibration, wind speed and wind direction, air quality, and groundwater can be installed effortlessly. Can be used on one Aurolex Monitoring System The system also has a connection for 220V, a charging unit and for a heavy maintenance-free battery (optional). The system automatically sends its data via a GPRS connection to our servers, where you can consult the data. It is also possible to receive a daily report in which the most used information is brought together. The system is equipped with a weather-resistant microphone. The Aurolex Monitoring System has the ability to monitor an extensive range of environmental issues. Sensors for vibration, wind speed and wind direction, air quality, and groundwater can be installed effortlessly. Can be used on one Aurolex Monitoring System The system also has a connection for 220V, a charging unit and for a heavy maintenance-free battery (optional). The system automatically sends its data via a GPRS connection to our servers, where you can consult the data. It is also possible to receive a daily report in which the most used information is brought together. The system is equipped with a weather-resistant microphone. The Aurolex Monitoring System has the ability to monitor an extensive range of environmental issues. Sensors for vibration, wind speed and wind direction, air quality, and groundwater can be installed effortlessly. Can be used on one Aurolex Monitoring System where you can consult the data. It is also possible to receive a daily report in which the most used information is brought together. The system is equipped with a weather-resistant microphone. The Aurolex Monitoring System has the ability to monitor an extensive range of environmental issues. Sensors for vibration, wind speed and wind direction, air quality, and groundwater can be installed effortlessly. Can be used on one Aurolex Monitoring System where you can consult the data. It is also possible to receive a daily report in which the most used information is brought together. The system is equipped with a weather-resistant microphone. The Aurolex Monitoring System has the ability to monitor an extensive range of environmental issues. Sensors for vibration, wind speed and wind direction, air quality, and groundwater can be installed effortlessly. Can be used on one Aurolex Monitoring System and groundwater can be applied effortlessly. Can be used on one Aurolex Monitoring System and groundwater can be applied effortlessly. Can be used on one Aurolex Monitoring System 7 sensors  are fitted. The results can be viewed and edited any time at any location in the world with an internet connection. The results can be displayed graphically or as data in tables. You can even receive graphs and automatic reports via e-mail. You can create your own reports and send them to customers automatically. Installing software yourself to read the meter or going to measurement locations to read the data is no longer necessary. Threshold values ​​can be set, above which an alarm is automatically sent by e-mail or SMS. The Aurolex system has very extensive options for achieving the desired result. For more information, see the website http://www.aurolexmonitoring.com. 

Highlights

• Push data system. Automatic measurement report and / or Excel file via e-mail, address of choice
• Alarms can be set online, via SMS or email, to groups or individuals
• Possible to have data automatically forwarded as a CSV file.
• LAN or WiFi not required, communication via GPRS or UMTS.
• Audio recordings at event (optional)
• Snapshot video at event (optional)
• Connection for 220V and 12V
• Connections for analogue sensors (9 pieces)
• Connection meteo station with (precipitation, wind, gps, light, visibility, RH, temperature, air pressure etc.)
• Connection audio recording, or automatic event sound recordings (pre-event adjustable)
• Mount on a tripod and / or with magnet mount.
• Plug-and-Play Place-on-sound measurement
• You do not need to install any software yourself. So no hassle with ITC department or headache that it doesn't work.
• You do not have to be a sound expert to use this system.
• Hassle-free maintenance system.
• Measurement data can be looked back 1 year.
• Useful for public websites (see www.aurolex-drenthe.com)
• Possibility to generate automatic reports yourself.
• Possibility to automatically plot measurement results and data on map material or photos.
• The measured values ​​are immediately available all over the world via a web interface.
• The system checks itself (and the meters) for incorrect digital signals.
• Configuration via web interface.
• Possibility to release a limited part of the data on the internet.
• 
  Integrated modem (ISDN, analog, Ethernet or GSM / GPRS).
• Energy supply via various options, 220V, battery, solar panel

Specifications:                                                  

• Type 1 sound level meter complies with IEC 61672; 2002.
• Type 1 microphone, 1/2 ", 20 mV / Pa, prepolarized condenser microphone with outdoor kit. 
• Measuring range 15 dB (A) RMS - 140 dB (A) peak.
• Meetdata o.a. Leq, Spl, Lep,d, Lden, L1-L99, Lmax, Lpiek. 
• Filter A, C and Z, to be measured simultaneously
• Dynamic range 120 dB. 
• Frequency range 20 - 20,000 Hertz, sample rate 48 kHz. 
• Working temperature -10 to + 50 degrees Celsius. 
• Humidity: maximum 90% relative humidity (not condensed). 
• Set is weatherproof and reliable
• Power supply of measuring set via built-in battery or with optional plug-in solar panel. 
• Wireless data transfer (GPRS, WLAN, GSM). 
• Prepared for adding sensors that record the measurement conditions such as wind speed and direction, air quality, vibration levels, light etc. Temperature and humidity are standard. 
• Online monitoring via the internet. Immediately view all your measurement points on the screen. The location of your measuring points is immediately visible via GPS system and Google Earth.

Aurolex system   The ABC-Aurolex Monitoring System offers the possibility to view and manage the process 24 hours a day from any location in the world with an internet connection. The results can be displayed graphically or as data in tables. You can generate automatic reports for which you can determine the layout yourself. These reports can be sent automatically to any email address as a pdf file. So you no longer need to go to the measurement locations to collect the data. Threshold values ​​can be set, above which an alarm is automatically sent via SMS or email. All measured values ​​can furthermore easily be edited via for example Excel. Push data system





Since we work with a so-called Push data system, you do not need to install any software when reading the data yourself. It also gives you the option to automatically generate reports yourself and even have the data automatically plotted on a map. Via the built-in GPS system, your measuring points are immediately visible via Google Earth when you log in to our server. We automatically take care of the backups and save the data as standard for 1 year. 

Data registration

For data registration we use the ABC-Monitoring Box II (part of the ABC-Aurolex System). This box with countless possibilities is equipped with an internal modem and is completely 'plug and play'. The measured values ​​are immediately stored in a database that can be consulted via the Internet. This gives the possibility to view the results online via the Internet. The ABC Monitoring Box II can be connected to almost all available sensors. Some examples are sound meters, vibration meters, humidity meters, temperature meters, light meters etc.

Trend module

The trend module offers the possibility to graphically display the data. The scaling of time and data can be set entirely to your own choice. Moreover, the data can be exported so that it is easy to edit in, for example, Excel. 

Alarm module The system is equipped with an alarm module that sends a warning or alarm via SMS or email if a preset value is exceeded. Errors or defects can also be displayed in the measurement system. Alarm overruns can optionally be visualized via the Internet Interface so that you can see directly at logging in at which measuring points the values ​​have been exceeded. Can be operated remotely





ABC Monitoring Box III features a number of ports that allow to manipulate the processes in the box. This can be used to be done if a reset from office equipment. Optional can be chosen for the module where the meter or sensor line can be set via the internet and tuned. 

Accessible from any location worldwide The system is made entirely web-friendly. One does not go to specific locations to get to the data or to a system reset. The data can be read from any PC with an internet connection.